Installation ManualH3C SecPath F1000-S Firewall Chapter 8 Multifunctional Interface Modules8-1Chapter 8 Multifunctional Interface Modules8.1 MIM OptionsFollowing are the MIMs available for the H3C SecPath F1000-S firewall:z 1-port 10Base-T/100Base-TX Fast Ethernet interface module (1FE)z 2-port 10Base-T/100Base-TX Fast Ethernet interface module (2FE)z 4-port 10Base-T/100Base-TX Fast Ethernet interface module (4FE)z 1-port 10Base-T/100Base-TX/1000Base-T Ethernet interface module (1GBE)z 2-port 10Base-T/100Base-TX/1000Base-T Ethernet interface module (2GBE)z 1-port 1000Base-LX/1000Base-SX optical interface module (1GEF)z 2-port 1000Base-LX/1000Base-SX optical interface module (2GEF)z Security socket layer encryption module (SSL)8.2 Installing and Removing an MIMCaution:There is a shield finger on the front panel of the MIM module, which provideselectromagnetic shielding for the firewall. You must keep the shield finger intact whenreplacing the module. Do not remove the shield finger.Before installing MIMs, read Chapter 2 “Preparation for Installation” carefully.I. ToolsESD-preventive wrist strapII. Installing an MIMCaution:Before performing any of the following operations, make sure you have completelypowered down the firewall to avoid getting electric shocks.Step 1: Place the firewall with its front panel facing you.
