H3C SR8800 Command Reference Manual

Also see for SR8800 IM-FW-II: Configuration guide Manual

Contents

H3C SR8800 Command Reference Manual Manual pdf 20 page image

12Examples# Set the SDH overhead byte J0 of ATM interface ATM 3/1/1. system-view[Sysname] interface Atm 3/1/1[Sysname-Atm3/1/1] flag j0 sdh ffframe-formatSyntaxframe-format { sdh | sonet }undo frame-formatViewATM main interface viewDefault level2: System levelParameterssdh: Sets the framing format to SDH STM-1/STM-4.sonet: Sets the framing format to SONET OC-3/OC-12.DescriptionUse the frame-format command to set the framing format for an ATM interface.Use the undo frame-format command to restore the default.By default, the framing format of an ATM interface is SDH STM-1/STM-4.Examples# Set the framing format of ATM 3/1/1 to SONET OC-3/OC-12. system-view[Sysname] interface Atm 3/1/1[Sysname-Atm3/1/1] frame-format sonetinterface atmSyntaxinterface atm { interface-number | interface-number.subnumber [ p2mp | p2p ] }undo interface atm interface-number.subnumberViewSystem viewDefault level2: System levelParametersinterface-number: ATM main interface number.subnumber: ATM subinterface number, in the range of 0 to 1023.