H3C SecPath F5030 Installation Manual

Also see for SecPath F5000-A: Configuration guide Manual Manual

Contents

H3C SecPath F5030 Installation Manual Manual pdf 19 page image

12Figure 7 Mounting the firewall to the rackGrounding the firewallWARNING!• Correctly connecting the firewall grounding cable is crucial to lightning protection and EMIprotection.• Do not connect the firewall grounding cable to a fire main or lightning rod.The firewall provides a primary grounding point at the rear panel and an auxiliary grounding point atthe left side. The primary grounding point has a grounding sign and a grounding screw. To use theauxiliary grounding point, attach the grounding cable to the grounding point before you install thedevice in a rack.The procedure is the same for connecting a grounding cable to the primary grounding point and theauxiliary grounding point. This section uses the primary grounding point as an example.To connect the grounding cable:1. Remove the grounding screw from the primary grounding point at the device rear.2. Attach the grounding screw to the ring terminal of the grounding cable.3. Use a screwdriver to fasten the grounding screw into the grounding hole.4. Connect the other end of the grounding cable to the grounding strip on the rack.