103. Use a cable tie to secure the power cord to the handle of thepower module.Figure 7 Securing the DC power cord4. Connect the other end of the DC power cord to a DC powersource.5. Turn on the power switch on the power module. If the Input LEDis on, the power cord is connected correctly. If the Input LED isoff, the connection might be wrong. Verify the installation andresolve the problem.Removing the power moduleCAUTION:To avoid bodily injury and device damage, strictly follow theprocedure in Figure 8 to remove the power module.

Overview

Views

LEDs

Installing and removing the power module

Installing the power module

Connecting the power cord

Removing the power module

H3C SecPath PSR300-12A2 User Manual

SecPath PSR300-12A2

SecPath PSR300-12D2