H3C WA2210-AG Installation Manual

Also see for WA2200 Series: Command reference Command reference Configuration guide Fundamentals configuration guide Installation guide

Contents

H3C WA2210-AG Installation Manual Manual pdf 63 page image

Installation ManualH3C WA2200 Series WLAN Access Points Chapter 5 Software Setting5-8IV. Binding the configurations to AP viewFollow these steps to bind the configurations to AP view:Step Operation1Enter system view.system-viewSystem View: return to User View with Ctrl+Z.[H3C]2Enter AP view and then radio view.For example, enter AP view named aptest2 and then radio 1 view.[H3C]wlan ap aptest2[H3C-wlan-ap-aptest2]radio 1[H3C-wlan-ap-aptest2-radio-1]3Bind a radio policy and a service template to an RF interface in AP view.For example, bind radio-policy 1 and service template 101 to the first RFinterface in AP view named aptest2.[H3C-wlan-ap-aptest2-radio-1]radio-policy 1[H3C-wlan-ap-aptest2-radio-1]service-template 101[H3C-wlan-ap-aptest2-radio-1]After the above configurations, wireless stations can detect and access the networkwhose SSID is fytest1.5.3.3 Security SettingFor the purpose of security, an encryption method can be applied to the authenticationof wireless stations and communication between wireless stations and the FIT AP. Thefollowing describes how to set the WEP104 encryption method on the AC.I. Setting the encryption templateFollow these steps to set the encryption template:Step Operation1Enter system view.system-viewSystem View: return to User View with Ctrl+Z.[H3C]2Create a service template, for example, encryption template 22, and enterits view.[H3C]wlan service-template 22 crypto[H3C-wlan-st-22]