H3C WX3500H Series Installation Manual

Also see for WX3500H series: User configuration guide Installations

Contents

H3C WX3500H Series Installation Manual Manual pdf 19 page image

12Figure 8 Installing the device in the rack (WX3508H)Grounding the deviceWARNING!• Correctly connecting the grounding cable is crucial to lightning protection and EMI protection.• Connect the grounding cable to the grounding system in the equipment room. Do not connect itto a fire main or lightning rod.To ground the device:1. Use a Phillips screwdriver to remove the grounding screw from the chassis.2. Use the grounding screw to attach the ring terminal of the grounding cable to the chassis.3. Connect the other end of the grounding cable according to the grounding method you use:{ Grounding the device with a grounding strip—If a grounding strip is available at theinstallation site, connect the other end of the grounding cable to the grounding strip andmake sure the grounding strip has been reliably grounded.