4.7 Automatic keypad switchoverThe automatic keypad switchover function serves to send telephone numbersthat begin with “*“ or “#“ as keypad signals. This function is sometimes neededin telecommunications systems. Some telecommunications systems or switchingcomputers can be controlled with keypad functions. Digits entered as keypadsignals are sent to the exchange as digitally coded signals.Initial state: idleSteps:No. Description Input Display4.8 Setting the date and timeNormally, the date and time are updated by the exchange when you start atelephone conversation. You can make the settings manually if your exchan-ge does not support this feature.Initial state: idleSteps:No. Description Input DisplayCHANGE DATE+TIME22.05.9988810:--Å‹ Ç ¤‰ ÏÌ ÓÛıR or s RClear individual digitsor the completedisplay2CHANGE DATE+TIME22.05.9988810:53Å‹ Ç ¤‰ ÏÌ ÓÛıs 0 1Initiateprogramming1AUTOKEYPAD§=§ON˜*88888OK88888#·Å‹ Ç ¤‰ ÏÌ ÓÛıoSave the input3AUTOKEYPAD§=§ON#8=8OFFÅ‹ Ç ¤‰ ÏÌ ÓÛı#Switch over thesetting (ON or OFF)2AUTOKEYPAD§=§OFF#8=8ONÅ‹ Ç ¤‰ ÏÌ ÓÛıs 0 0 5Initiateprogramming149