HAKO Hakomatic B910 (7744) Instruction Manual

Contents

433 Pedal for brush/pad pressureto adjust brush/pad pressure. Slowly press pedal down untilthe pressure point is attained.Release pedal and it will lock.= increased brush/pad pressureand the yellow pilot lamp (I/C)alights Actuate pedal beyond the pres-sure point and release. It will liftup to initial position.= normal brush/pad pressure andthe pilot lamp extinguishesNote: An increased brush/padpressure increases current con-sumption and brush/pad wear.4 Parking brake pedalactuates the parking brake at therear wheels. Before leaving themachine the operator has to protectit by actuating the parking brake.The pilot lamp (I/E) alights. Whendepressing the drive pedal a buzzersounds. Depressing the blockingdevice will unlock the brake.5 Forward drive pedalallows modification of speed slowly depress pedal until therequired speed is attained. release pedal and it will automa-tically return to the initial positionand the machine slowing downsimultaneously. Speed will be sub-stantially reduced by actuatingthe reverse drive pedal.6 Reverse drive pedalallows modification of speed slowly depress pedal until therequired speed is attained andthe buzzer sounds. release pedal and it will automa-tically return to the initial positionand the machine slowing downsimultaneously.The machine must only be started ifthe operator is seated down.I1 Left-hand control panel2 Right-hand control panel3 Pedal for brush/pad pressure4 Parking brake pedal5 Forward drive pedal6 Reverse drive pedalOperationOperation elements1 Left-hand control panel(Description see page 44)2 Right-hand control panel(Description see page 44)1342653 Pedal for brush/pad pressureto adjust brush/pad pressure. Slowly press pedal down untilthe pressure point is attained.Release pedal and it will lock.= increased brush/pad pressureand the yellow pilot lamp (I/C)alights Actuate pedal beyond the pres-The pilot lamp (I/E) alights. Whendepressing the drive pedal a buzzersounds. Depressing the blockingdevice will unlock the brake.5 Forward drive pedalallows modification of speed slowly depress pedal until therequired speed is attained. release pedal and it will automa-tically return to the initial positionand the machine slowing downsimultaneously. Speed will be sub-stantially reduced by actuating1342653 Pedal for brush/pad pressureto adjust brush/pad pressure. Slowly press pedal down untilthe pressure point is attained.Release pedal and it will lock.= increased brush/pad pressureand the yellow pilot lamp (I/C)alights Actuate pedal beyond the pres-The pilot lamp (I/E) alights. Whendepressing the drive pedal a buzzersounds. Depressing the blockingdevice will unlock the brake.5 Forward drive pedalallows modification of speed slowly depress pedal until therequired speed is attained. release pedal and it will automa-tically return to the initial positionand the machine slowing downsimultaneously. Speed will be sub-stantially reduced by actuating134265