HAKO Sweepmaster B800 R Instruction Manual

Also see for 6400.20: Service booklet

HAKO Sweepmaster B800 R Instruction Manual Manual pdf 43 page image

43Maintenance and Service5 Maintenance and Ser-viceGeneral informationIt is essential to pay attentionto the information in Chapter"Safety Information" beforecompleting any service ormaintenance work!By adhering to the maintenance workrecommended by us, you can be surethat the vehicle is always ready to beput into operation.Maintenance and repair work neces-sary on a daily and weekly basis can becarried out by a driver trained to com-plete the work, all other Hako systemmaintenance may only be completed bypersonnel who are correspondinglyqualified and trained. In case of doubt,please contact your nearest Hako ser-vice center or authorized Hako dealer.Failure to observe this annuls any rightsto claims under the terms of guaranteein respect of resulting damage or con-sequential damage.Always specify the serial number, indi-cated on the rating plate, when makingany inquiries and orders for spare parts,refer to Section 1.7 - Rating plate.5.1 Hako system maintenanceHako system maintenance:• ensures the Hako working vehicle isalways ready for operation (preven-tive maintenance),• minimizes operating costs, mainte-nance and repair costs,• ensures the vehicle has a long ser-vice life.The Hako system maintenance de-scribes the specific technical work nec-essary for the individual modules anddefines the intervals for the mainte-nance tasks. Individual parts whichmust be changed during maintenancetasks are defined and stipulated inspare parts kits.Hako system maintenance, cus-tomer:Work to be carried out by the customeraccording to the service and mainte-nance instructions in the operatingmanual (daily and weekly). The driver/operator receives detailed instructionwhen the vehicle is delivered.Hako system maintenance I:(Every 125 operating hours)Must be completed by a skilled techni-cian in an authorized Hako service cen-ter according to the vehicle-specificsystem maintenance with a spare partskit.Hako system maintenance II:(Every 250 operating hours)Must be completed by a skilled techni-cian in an authorized Hako service cen-ter according to the vehicle-specificsystem maintenance with a spare partskit.Hako system maintenance III/S:(Every 500 operating hours, safetycheck)Must be completed by a skilled techni-cian in an authorized Hako service cen-ter according to the vehicle-specificsystem maintenance with a spare partskit. Completion of all legally prescribedsafety-related tests in accordance withUVV-BGV-TÜV-VDE.