HAMPTON BAY HB2579-34 Use And Care Manual

5 Threading the cord Feed the cord and fixture ground wire intothe center hole of the screw collar loop(HH), through the nipple (EE), and then outof the outlet box. Continue feeding the cord and fixtureground wire until there is no slackremaining. Cut off any excess cord and fixture groundwire, leaving 6 in. extending from the outletbox. Split and separate the fixture cord and stripoff 3/8 in. of insulation from each wire.6 Connecting the wires Loop the fixture ground wire around theground screw located on the mountingbracket (JJ) and leave 4 in. of wireextending from the ground screw. Tighten the ground screw against themounting bracket (JJ). Connect the black supply wire to thesmooth fixture wire using a wire nut (BB). Connect the white supply wire to the ribbedfixture wire using a wire nut (BB). Connect the fixture ground wire and thesupply ground wire together using a wirenut (BB). Wrap all wire connections with electricaltape for a more secure connection. Carefully tuck all wire connections into theoutlet box.Installation (continued)7NOTE: If you have electrical questions consultyour local electrical code for approvedgrounding methods.EEHHJJKKFFAAEEHHJJKKFFAAJJKKAAHHEEBBFF