HANNspree SL22D Manual
                        | |
Contents
| 
ENGLISH21PVRSLEEP FAV.Time Shift FunctionAllows you to record the TV program so that you won’t miss the favorite part even if you goout. Before you use the function, connect a USB device to the TV first. For the first time, youshould do the disk setup for the USB device.1 Switch the input source to DTV mode.2 Press to pause the picture and begin the time shift.3 Press to continue the program.4 Press to fast forward or press to rewind the timeshift file.5 Press to quit the time shift function.Notes:Before you plug the USB device to TV, make sure you have backed up the data in the device to avoid unusual•performances make your important data lost.We recommend you use a USB device with the free file size bigger than 1Gb and disk speed faster than 5.0M/•sec.The bigger file size for the time shift, the longer you can record the program.•If changing channel in time shifting, a message prompts to let you select• Yes or No. You can select Yes to exitthe time shift function and execute the channel change.PVR (Personal Video Record)This function allows you to record your favorite TV program to a USB device.1 Plug a USB device to the USB connector on the TV.2 Press the red button to start recording. A PVR mini panel appears on the screen to indicatethe recording progress.n Use p/q/t/u to adjust the recording duration.n Press the green button to stop recording manually. Otherwise, the recording will stopautomatically when the recording duration is complete.n The recorded file is saved into a PVR folder in Media Center > Video > pvr.3 To watch the recorded program, exit the PVR mode first and switch to USB mode. Go toMedia Center > Video and select the desired recorded file in the PVR folder. Press OK toplay.Notes:This function is only available for digital channels.•This function only supports USB device of FAT32 format.•Before you plug the USB device to the TV, make sure that you have backed up the data in the device to avoid•unusual performances that might cause data lost.The bigger storage size of the USB device for PVR function, the longer you can record the program.•If you want to switch the channel or signal source during recording, it will prompt you whether to stop recording,•select OK if you want to save the recorded data. Then switch to a new channel or signal source.The TV can not play files normally if the file parameters exceed the system limitations, the file format is not•supported, the file is damaged, or the file can not be decoded.Do not unplug the USB device when the system is recording data or reading a file. This may cause system or•device malfunction. |
Related manuals for HANNspree SL22D
manualsdatabase
Your AI-powered manual search engine