28English 3.1 OSD Setting MenusFollow the instructions indicated on the bottom of the OSD Function Menu. Press/ on the control panel or / arrow keys on the remote control to scrollthrough the menus. press INPUT/ VOL+ on the control panel or OK key on theremote control to select an item and then press MENU/ VOL- key to exit the OSDmenu. The following menus can be set by different adjustment methods.3.2 Adjusting Picture Settings1 Press MENU to enter the OSD Main Menuscreen.2 Press / on the remote control orCHS / CHT on the control panel to selectPicture menu.3 Press / OK on the remote control orINPUT/ VOL+ on the control panel toenter the Picture menu.4 Press / on the remote control or CHS / CHT on the control panel to selectan item.5 Press / OK on the remote control or INPUT/ VOL+ on the control panel to enterthe item.6 Press / on the remote control or VOL+/ VOL- on the control panel, to changethe scales or press OK on the remote control or INPUT/ VOL+ on the control panelto mark an item.7 Press RETURN to return to the Picture menu.8 Press MENU/ VOL- to exit the Picture menu.9 The Picture menu can be used to adjust the Picture mode, Brightness, Contrast,Sharpness, Color, Tint, Digital NR, X-Contrast, Aspect Ratio, Color Temp andRecall settings. Brightness, Contrast, Sharpness, Color, and Tint are onlyavailable for adjustments if you select User in Picture Mode. Press / on theremote control or VOL+/ VOL- on the control panel to adjust these settings.• The Picture Mode can be set to Vivid, Standard, Movie, or User.• The Digital NR can be set to Off, Weak, Medium, or Strong.• The X-Contrast can be set to Off or On.• The Aspect Ratio can be set to Full, Normal, Zoom, Subtitle, Auto, Zoom-1.• The Color Temp can be set to Warm, Standard, or Cool.• The Recall can be used to reset the original factory settings.Note:The items available on the OSD may vary depending on the input signal source.CH CHPictureAudioChannelV-CHIPSetupPicture ModeBrightnessContrastSharpnessColorTintDigital NRX-ContrastAspect RatioNext PageExitReturnEnter MenuMove ReturnOK