HANNspree ST289MUB User Manual

Also see for ST289MUB: Quick start guide

Contents

HANNspree ST289MUB User Manual Manual pdf 26 page image

26English 2.3 Using the TV2.3.1 Turning the TV On and Off1 Press on the control panel or remote control. The power LED indicator onthe TV changes from red to green, indicating that the TV is on.2 Press again. The power LED changes from green to red, indicating thatthe TV is off .2.3.2 Switching Source SignalsPress INPUT on the control panel or remote control to select the incoming sourcesignal to set TV source for channel search. Press OK to confirm.2.3.3 Performing an Automatic Channel SearchBefore using the TV to view programs, you need to activate the channel search first.1 Press MENU on the control panel or remote control, then select to enter theChannel menu.2 Select Antenna to set the signal source. (Air or Cable, default is Air)3 Select Auto scan, then Start option.4 Press OK on the remote control to run the channel search.2.3.4 Selecting Channels• Press CHS on the control panel or on the remote control to increase thechannel number.• Press CHT on the control panel or on the remote control to decrease thechannel number.• Enter the specific channel number by pressing the number buttons on theremote control.2.3.5 Adjusting the Volume1 Press VOL+ on the control panel or on the remote control to increase thevolume.2 Press VOL- on the control panel or on the remote control to decreasethe volume.CHCHVOLVOL