HANNspree ST321MNB User Manual

33English3.7 Adjusting Setup Settings1 Press MENU to enter the OSD MainMenu screen.2 Press / on the remote control orPS / PT on the control panel to selectSetup menu.3 Press / OK on the remote control orINPUT / VOL+ on the control panel toenter the Setup menu.4 Press / on the remote control or PS / PT on the control panel to select anitem.5 Press / OK on the remote control or INPUT / VOL+ on the control panel to enterthe item.6 Press OK on the remote control or INPUT / VOL+ on the control panel to mark anitem or perform a function.7 Press MENU to exit.8 The Setup menu can be used to adjust the OSD Language, OSD Time, CommonInterface, SCART1, SCART2, Mode Setting, Hannspree Light, First Time Setup,and Recall settings. The Common Interface is only available when the CI device isconnected. If you want to exit from CI Main menu, please press Red key on yourremote control. The SCART1 and SCART2 are only available for adjustments whenthe input source is set to SCART1 or SCART2.• The available OSD languages are: English, Deutsch, Français, Italiano,Español, Nederlands, Magyar, Português, and Polski.• The OSD Time Out can be set to 10 seconds, 20 seconds, 30 seconds, and60 seconds.• The Common Interface can be used to access the connected CI device.• The SCART1 can be set to Auto, RGB, CVBS, or S-Video.• The SCART2 can be set to Auto, CVBS, or S-Video.• The Mode Setting can be set to Home Mode or Store Mode.• The Hannspree Light can be set to Off, Low, Medium, or High.• The First Time Setup can be used to adjust the OSD Language, Mode Setting, andCountry settings.• The Recall can be used to restore the Setup settings to the factory defaults.Note:The items available on the OSD may vary depending on the input signal source.ReturnSelect MenuMove OKOSD LanguageOSD TimeCommon InterfaceSCART1SCART2Mode SettingHannspree LightFirst Time SetupRecallPictureAudioClock / TimerChannelSetup