HANNspree Xv HT09 User Manual

Also see for Xv HT09: Specifications Quick start guide

HANNspree Xv HT09 User Manual Manual pdf 40 page image

40English perform this unlock operation, while those electronic equipment modes not sooperated still have channel locked up). The indicator light then goes off and settingmode is exited.4. During the setting process, releasing the electronic equipment button exits thesetting mode immediately without changing the status prior to setting.5. Buttons other than CH+/CH- are not functional during search. Channel buttonsinclude CH+ and CH-.6.1.6 Factory Setting ModeFactory setting operation procedures are as follows:1. Press the corresponding electronic equipment button. The indicator light will comeon for 200ms and then go off; after 3 seconds, the indicator light will come on again,showing setting mode has been entered.2. While holding the electronic equipment button, first press < (left arrow), then pressOK. The indicator then goes off and setting mode is exited, showing factory settinghas been restored.3. During the setting process, releasing the electronic equipment button exits thesetting mode immediately without changing the status prior to setting.4. Pressing any of the electronic equipment buttons to enter factory setting operationmode.5. The default current electronic equipment is TV upon first power-on.Electronicequipment Code NoteTV 1001 Provided bymanufacturerCABLE -- Transmit TV codeAUDIO -- Transmit TV codeDVD -- Transmit TV code28US_LCDTV.book Page 40 Thursday, July 3, 2008 5:33 PM