Hach NA5600 sc Na+ Operations

Also see for NA5600 sc Na+: Maintenance and troubleshooting Installation Installation Operation guide

Contents

Hach NA5600 sc Na+ Operations Manual pdf 8 page image

• Push the LEFT or RIGHT arrow to switch between the main display and a graphical display.• Multi-channel analyzers:• Push the UP or DOWN arrow to change the channel shown and see the last measurement forthe channel.• Push the LEFT or RIGHT arrow to show more channels and a graphical display.• In the graphical display, push the UP or DOWN arrow to show the graph for the previous or nextchannel. Refer to Graphical display on page 8 for additional options.Graphical displayThe graphical display shows measurements for a maximum of four channels. The graph supplieseasy monitoring of trends and shows changes in the process.1. From the main measurement screen, push the LEFT arrow to show the graphical display.Note: Push the UP or DOWN key to show the graph for the previous or next channel in sequence.2. Push home to change the graph settings.3. Select an option.Option DescriptionMEASUREMENT VALUE Sets the measurement value range on the graph for the selected channel. Selectbetween AUTO SCALE and MANUALLY SCALE. Enter the minimum andmaximum ppb value in the MANUALLY SCALE menu.DATE & TIME RANGE Selects the date and time range to show on the graph: last day, last 48 hours, lastweek or last month.ConfigurationSet the language1. Push menu, then select SETUP SYSTEM > LANGUAGE.2. Select the language that shows on the display and in the log files.Remove channels from the measurement screen (2- or 4-channelanalyzers)Remove the channels that are not measured (e.g., 4-~SAMPLE4) from the measurement screen.Change the order that the channels show on the measurement screen as necessary.1. Remove the channels that are not measured (e.g., 4-~SAMPLE4) from the measurement screenas follows:a. Push menu, then select SETUP SYSTEM > DISPLAY SETUP > ADJUST ORDER >REMOVE MEASUREMENTS.b. Select the channels that contain the symbol "~" (e.g., 4-~SAMPLE4), then push enter twotimes.Note: To add a channel to the measurement screen, select ADD MEASUREMENTS.2. To change the order that the channels show on the measurement screen, select an option.Option DescriptionSEE CURRENT ORDER Shows the order that channels show on the measurement screen.REORDER LIST Sets the order that channels show on the measurement screen.SEE DEFAULT ORDER Shows the default order that channels show on the measurement screen.SET TO DEFAULT Sets the order that channels show on the measurement screen to the defaultorder.8 English