Hach ORBISPHERE 3100 User Manual

Also see for Lange ORBISPHERE 3100: Basic user manual Basic user manual

Contents

Hach ORBISPHERE 3100 User Manual Manual pdf 29 page image

27User InterfaceThe numeric measurement value at the end of the curve is refreshed every 5 seconds. Thecurve is refreshed every 5 seconds in sample mode. In continuous mode, the refreshment rateis the same as that defined as the storage interval parameter (see Advanced settings onpage 32).The graphic timescale is displayed at the bottom of the screen. This value can be increased ordecreased (4 zoom levels) by pressing the up and down arrows on the keyboard. These valuesare also dependant on the storage interval parameter; the greater the storage interval, thegreater the available timescales.The measurement scale is calculated automatically with the maximum and minimum valuesdisplayed at the top and bottom of the y axis respectively.The color of the curve has the following meaning:• Grey (normal): The channel is out or the measurement is out of range• Green (bold): The channel is being calibrated• Grey (bold): The measurement has not started (sample mode only)• Red (bold): An alarm has been activated• Blue (bold): Normal measurementThe graphical display is cleared and restarted after the following events:• At instrument startup• After a change to the storage mode (see Advanced settings on page 32)• After a change to the measurement mode (sample or continuous)• After a change to the current measurement configuration4.4.5 Diagnostic measurement displayThe diagnostic measurement display is only accessible if the user is logged on at supervisorlevel. To access this display from the standard measurement display screen, press the rightarrow key on the keypad until the following screen is displayed:The information displayed can be useful for troubleshooting purposes.Note: There are two event masks at the bottom right of the screen. The first is the common event mask andthe second is the oxygen channel event mask. For details of their meanings refer to the tables in List ofevents on page 41.In sample mode, a symbol is displayed to denote the end of themeasurement (illustrated right). This is displayed in green if the stopcriteria are met, or red to denote an erroneous measurement.