Basic settings1. Language selectionOption DescriptionLanguage Select the working language for the instrument from the list available2. Date and time adjustmentOption DescriptionDate format Define the display format for the date (DD/MM/YY or MM/DD/YY)Date Enter the day, the month and the year in the format defined aboveTime format Enter the display format for the time using a 12 or 24 hour clockTime Enter the hour and minutes in the format defined above3. Backlight managementOption DescriptionBacklight level Enter the scale of brightness (max, comfortable, standard, economy or min)4. Units managementOption DescriptionPressure unit Choose the barometric pressure unit from the list availableTemperature unit Choose the temperature unit from the list availableAdvanced settings1. File measurement managementOption DescriptionStoragemodeChoose from a rolling buffer or store once:• Rolling buffer: When the file is full, the latest measurement set replaces the oldest onecontinuously (first-in, first-out)• Store once: When the file is full (5,760 positions), the recording of measurement stopsStorageintervalDefine the interval for storing measurements from the list available.The interval is in seconds with the number of hours of measurements available shown inbrackets e.g. 10s (16h) indicates measurements are stored every 10 seconds, which willgive 16 hours of continuous storageNote: This parameter also defines the refreshment rate for the graphic measurementdisplay.Clear data Select this option to erase the measurement storage file2. CommunicationOption DescriptionRS232 Check the box if the RS232 link is requiredBaud rate Select the baud rate from the list available3. MiscellaneousOption DescriptionMiscellaneous This option allows the default measurement configuration parameters to be restoredEnglish 15