Hach TitraLab AT1102 Basic User Manual
Also see for TitraLab AT1102: Basic user manualBasic user manualUser manual
                                                                                                                                                              | |
Figure 4 Contents of the application box1 Beakers (10 x 50 mL and 10 x 150 mL) 7 Syringe holding ring52 Tube with anti-diffusion tip2 8 Syringe (refer to Table 1 on page 6 for quantity)3 Conical adapters (2x) 9 USB applications key4 Magnetic stir bars (10x) 10 Glass bottles65 Legacy sensor adapter3 11 Bottle caps (2 x GL45 and 1 x GL25)6 Sensor4 12 Empty desiccant cartridges (3x)InstallationC A U T I O NMultiple hazards. Only qualified personnel must conduct the tasks described in this section of thedocument.The instrument is available in different configurations (refer to Table 1 on page 6). This manualsupplies instructions for the installation of an instrument with one syringe and one pump. Adjust theinstallation procedure as applicable to accommodate the number of syringes and pumps in theinstrument.Installation guidelines• This instrument is for indoor use only.• The power supply connector on the rear panel must be easily accessible so the power can bedisconnected quickly in case of emergency.• Keep the instrument away from temperature extremes, including heaters, direct sunlight and otherheat sources.5 1 for each syringe2 If necessary for the application6 Not in all application kits3 Not in all application kits4 Type and quantity depends on application8 English |
Related manuals for Hach TitraLab AT1102
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine