6OPERATION MANUAL2.1 GENERAL SAFETY REQUIREMENTSDO NOT use this machine unless you have read this manual or have been instructed in the useof this machine in its safe use and operationSafety glasses must be worn atall times in work areas. Earmuffsshould be worn if the work area isnoisy.Sturdy footwear must be wornat all times in work areas.Gloves should NOT be worn whenusing this machine. They shouldbe used when handling the workpieceLong and loose hair must becontained with a net or under ahatThis manual provides safety instructions on the proper setup, operation, maintenance, andservice of this machine. Save this manual, refer to it often, and use it to instruct other operators.Failure to read, understand and follow the instructions in this manual may result in fire orserious personal injury—including amputation, electrocution, or death.The owner of this machine is solely responsible for its safe use. This responsibility includes, butis not limited to proper installation in a safe environment, personnel training and authorizationto use, proper inspection and maintenance, manual availability and comprehension, of theapplication of the safety devices, integrity, and the use of personal protective equipment.The manufacturer will not be held liable for injury or property damage from negligence,improper training, machine modifications or misuse.WARNINGDISCONNECT POWER FIRST. If using power,always disconnect the machine from power sup-ply before making adjustments, or servicing themachine. This prevents any risk of injury fromunintended startup or contact with liveelectrical equipmentOWNER’S MANUAL. Read and understand thisowner’s manual before using the machine.TRAINED OPERATORS ONLY. Operators thathave not been trained have a higher risk ofbeing seriously injured. Only allow trained orsupervised people to use this machine. Whenthe machine is not being used, disconnect thepower, to the machine to prevent unautho-rized use—especially around children. Makethe workshop safe.2. IMPORTANT INFORMATIONPage 6Instruction Manual for EB-260V (B062V)04/04/2019