Haier 10515690 Operation Manual

Contents

Disposal of the condensed waterGenerally there are two methods available on disposal of the condensed water:1. Block the bottom plate hole of the conditioner with rubber lid, install outlet pipe fitting on theback hole and let the condensing water flow from the back hole of the conditioner. (See Fig.1 )2. Block the back hole of the conditioner with rubber lid and install outlet pipe fitting to the bottomhole, which can make the condensed water flow out from the bottom plate. (See Fig.2)If necessary the above two methods can both have extra pipe added on the outlet pipe fitting.(available on the market).In this method, the accumulated condensed water in the bottom plate is hit by the fan onto theheat exchanger, and evaporated and blown out from the machine. It can cool the heat exchangerradiator more quickly, and improve the energy efficiency of the conditioner. But the hitting noiseby the fan at the outdoor side is relatively large.CautionsPower cord: Be sure to use the exclusive power cord.Change installation place: If air-con need to be changed to anotherplace please contact the dealer, who sold you the unit.(Refer to P15 for choosing these two modes.)Bottom plate holeBack holeOutletpipe fittingFig.1Rubber lidFig.2Rubber lidBack holeOutlet pipe fittingBottom plate hole12