Haier 19T51 User Manual

Contents

Remote control battery installation method:Take off the cover of battery box, fix two AAA batteries with 1.5 volt, and conform with the polarity of remote controlbattery box.Note: Appearance of the remote control may be different from this picture, please according to practicality.Precautions for use of remote control:1. When using remote control you should point it to the remote-control inductive window. The goods between remotecontrol and inductive window may hinder normal operation.2. Do not cause the remote control to receive fierce vibration. In addition, do not set or place the remote control underdirect sunlight, for the thermal energy will cause the distortion of remote control.3. When remote-control inductive window of main machine is under direct sunlight or intense illumination, the remotecontrol may malfunction, by now, please change the angle of illumination or this machine, or approach the inductivewindow to operate the remote control.4. When the battery voltage is insufficiency it influences the remote control distance, you should replace with new battery;when not to use the remote control for long or the battery is exhausted, please take out the battery, in order to avoidbringing the battery leakage to corrode the remote control and thus cause it out of commission.5. Do not use different batteries. The mix use of new and old batteries is not allowed, you should use battery pair.6. Do not throw battery into fire, charge or disassembly, especially do not charge, assemble and disassemble, heat orburn to the used battery. Please observe the related environmental protection stipulation on wasted battery.19