VOLUMECOLOR AUTOSOUND DKselect adjustPRE BACKSYSTEMViewing TV ProgramsThe channels amount to 218(0-218).Viewing TV programsHow to select the TV program1.Use the direct-digit choosing button2.Use CH+/- buttonPress CH+ to increase the channel position number.Press CH- to decrease the channel position number.Press the button from 0-9 to select a one digit channel.If you want to select a two-digits channel, press theDigit Select button and change it into two-digits mode,then press the number of the channel.If you want to select a three-digits channel, press theDigit Select button and change it into three-digits mode,then press the number of the channel.3.Use PRE button and BACK buttonPress PRE button, you can go back to the channels youviewed (as many as four).Then, press Back button, you can return to the channels youwere watching just now (as many as four) .For example, if you have viewed channel 1,2,3,4,5,6 after theTV is powered on, and the channel you are watching now isnumber 7, then press PRE button, you can view channel 6,5,4,3, and you may press the Back button to return to channel 7.If the channel position number you select is larger than 218,the TV will use the first two number as the channel position.Choose the proper volume you likePress VOL+/- button to adjust the volume.If the color or sound of one channel is abnormalIt might be because the color or soundsystem has been set improperly.You mayfollow the instruction below to adjust it.Press SYSTEM button, and you can seethe form.Press CH+/- button, and move the indicator to COLOR,and press VOL+ button to select the proper color(AUTO,PAL,SECAM,NTSC4.43 and NTSC3.58 will appear alternately).Press CH+/- button, and move the indicatorto SOUND, and press VOL+/- buttonto select the proper sound (DK and BG willappear alternately).If the color of the picture is abnormalIf the sound is abnormalMENUCH+CH-VOL- VOL+If tne VOL STORE is set ON, the volume ofthe pre-fifty channel will be storedindependently.Press VOL+ to increase the volume, pressVOL- to decrease the volume.Direct-digit ChoosingbuttonDigit SelectbuttonCOLOR AUTOselect adjustSOUND DK