Haier 26T32 User Manual

Contents

Basic Operation Instruction164. Press ''Left/Right'' key on the remote control or ''VOL+/ VOL-'' on the front panel toadjust the value or setting.5. Press ''Menu'' key to exit the main menu when the TV displays the Main Menu;Press ''Menu'' key to return to previous menu when the TV displays the sub-menu;Press ''Source'' key to display the signal source menu. Press ''Source'' key againto exit the signal source menu6. During the operation, the selections which can not be adjusted at current mode willbe hidden automatically and the color of the selections will be changed into gray.7. Menu Operation Instruction in this manual is explained according to TV mode. Theoperations in other modes are similar to the one in TV mode. Users can take it asreference.Press "Left/Right" key on the remote controlor the "VOL+/VOL-" key on the front panel toselect Picture, then press "Up/Down" key onthe remote control or "CH+/CH-" key on thefront panel to enter into Picture menu(Fig.3).Select items which you wish adjust by pressing"Up/Down" key on the remote control or "CH+/CH-" key on the front panel, then press "Left/Right" key on the remote control or "VOL+/VOL-"key on the front panel to adjust analog, state orenter into corresponding submenu.PICTURE5550711050PICTUREPicture ModeBrightnessContrastColorSharpnessColor TempDNRHuePersonalNormalOffMENUSelect Adjust ReturnDescriptionFunctionOptionSelect picture modeAdjust brightness and blackness ofwhole pictureAdjust the contrast of whole pictureAdjust the saturation of whole pictureAdjust the hue of whole pictureAdjust the sharpness of whole pictureSelect color temperature mode of thepictureOpen or close DNR functionPicture ModeBrightnessContrastColorHueSharpnessColor TempDNR"Standard, Dynamic, Soft, Personal" four modes.Increasing analog value increases brightness;Decreasing analog value decreases brightness(0-100)Increasing analog value increases contrast;Decreasing analog value decreases contrast(0-100)Increasing analog value increases color;Decreasing analog value decreases color (0-100)Increasing analog value increases green;Decreasing analog value increases purple (0-100).Increasing analog value increases definition;Decreasing analog value decreases definition (0-100)There are three color temperature modes, "Normal","Warm", "Cool "."On/Off", two states.Special Attention1. The Hue function is available only for NTSC system.2. The value adjusted by user, such as Brightness, Contrast, Color, Hue andSharpness will be saved automatically by the machine as Personal mode.Fig.3