Haier 29F3A Owner's Manual

Also see for 29F3A: Owner's manual Owner's manual

Haier 29F3A Owner's Manual Manual pdf 9 page image

Watching TVWatching TV programYou can watch TV program in a preset channel.TUNEHow to select TV programSelect the desired programSelect the desired sound1 Using "Program number" buttons2 Using the CH+/- buttonsPress the CH+ button to select a channel number in numberdirection.Press the CH- button to select a channel number in numberdirection.increasingdecreasingPress the VOL-/+ buttons on the remote or the front of theTV set to adjust the volume level. The range is 0~99. Whenthe volume buttons are pressed the volume level isdisplayed automatically on the TV screen.If picture colo r is abnormaluUse the CH+/- buttons to select Colour then theVOL-/+ buttons to change between Auto,. Press the EXIT button to savethe setting.PAL, NTSC,SECAM and NTSC443If the colour or sound of a channel is abnormalUsually this should be set in theAuto position. However if thecolours displayed on the screenare incorrect you can manuallyselect the correct colour system.When finish remember to turn itback to auto again so that otherprograms will still work correctly.To select the colour changeoption press the TUNE buttonon the remote control.TUNEBAND VHFLSKIP OFFPROGRAM 0SEARCHFINE TUNEAUTO SEARCHCOLOUR AUTOSOUND DKDirectly enter the channel number with the numeric keypadon the remote control.To select channel numbers from 10 ~ 99 press [-/--] buttonand enter the two digit channel numberTo select channel numbers from 100 ~ 218 press [-/--] buttontwice and enter the 3 digit channel numberIf the picture sound is abnormalUse the CH+/- buttons to select Sound then press theVOL-/+ buttons to select the sound system.In general, BG will display in turn.DK,