BASIC FEATURETECHNICAL SPECIFICATION2Stage curtain for open and close effect218 programs storedMulti-picture modes and sound modes selectionOn/Off timerChild lockSoft exchangeCountAppointmentDVD component inputAntenna connectionConnect an antenna to the antenna socket onthe TV set, we recommend using a Cable TVsystem for better picture and audio quality.1.If you use a coaxial cable(75 ),insert theantenna plug (see figure C) into 75 socket(see figure A).2.If you use a twin-lead cable(300 ),pleaseshape the cable as figure D, and connect theleads to antenna adapter and then insert theantenna adapter into the 75 socket (seefigure B).Power source wire connectionInsert the power plug into AC outlet.Install and replace batteries of theremote control unit:1.Place the remote control unit with the facedown, then open the battery cover of theunit.2.Place the two"AA"size batteries, matchingthe + and - signs on each battery to the +and -signs of the battery compartment.3.Close the cover of the battery compartment.NOTE:(1)Don't drop or wet or dismantle the unit.(2)If you don't intend to use the unit for along period or the electricity of thebatteries is used up, remove the batteriesto prevent batteries acid from leakinginto the battery compartment.(3)Replace the two old batteries at thesame time.(4)Don't use charge battery (Ni-cd )anddon't mix battery type.(5)Don't throw your batteries into a fire.Dispose of your batteries in a requiredplace.PREPARING FOR OPERATIONS3Figure A Figure BAntenna cablewith a plugFigure C Figure DAntenna feederAntenna adapter75-300¦¸Coaxial cable(75 ) twin-lead cable(300 )Antenna1.CRT: 29"2.COLOUR SYSTEM: PAL NTSC3.58/4.43(AV)3.AUDIO SYSTEM: BG4.POWER SUPPLY: ~220V 50Hz5.POWER SUPPLY VOLTAGE RANGE: ~160V -250V 50/60Hz5.POWER CONSUMPTION: 155W6.ANTENNA INPUT IMPEDANCE : 757.VIDEO INPUT: 1.0Vp-p( 75 )8.VIDEO OUTPUT: 1.0Vp-p( 75 )9.AUDIO INPUT: 400Vrms(40k )10.AUDIO OUTPUT: 400Vrms(600k )11.SOUND OUTPUT POWER: 10W+10WSupplied accessories:Infrared remote control handset 1Battery(AA) 2Operating instruction 1Design and specifications are subject to change without notice.