Haier 29FA10-AM Owner's Manual

Haier 29FA10-AM Owner's Manual Manual pdf 8 page image

VOLUMEPRE BACKSYSTEMViewing TV ProgramsThe channels amount to 218 .Viewing TV programsHow to select the TV program1. Use the direct-digit choosing button2. Use CH+/- buttonPress CH+ to increase the channel position number.Press CH- to decrease the channel position number.Press the button from 0-9 to select a one digit channel.If you want to select a two-digits channel, press theDigit Select button and change it into two-digits mode,then press the number of the channel.If you want to select a three-digits channel, press theDigit Select button and change it into three-digits mode,then press the number of the channel.3. Use PRE button and BACK buttonPress PRE button, you can go back to the channels youviewed (as many as four).Then, press BACK button, you can return to the channels youwere watching just now (as many as four) .For example, if you have viewed channel 1,2,3,4,5,6 after theTV is powered on, and the channel you are watching now isnumber 7, then press PRE button, you can view channel 6,5,4,3, and you may press the Back button to return to channel 7.If the channel position number you select is larger than 218,the TV will use the first two number as the channel position.Choose the proper volume you likePress VOL+/- button to adjust the volume.If the color of one channel is abnormalIt might be because the color has beenset improperly.You may follow theinstruction below to adjust it. PressSYSTEM button, and you can seethe figure.Press CH+/- button, and move the indicator to COLOR,and press VOL+/- button to select the proper color(AUTO,NTSC3.58,NTSC4.43 and PAL will appear alternately).Generally, please set to AUTO.If the color of the picture is abnormalMENUCH+CH-VOL- VOL+Direct-digit ChoosingbuttonDigit SelectbuttonPress CH+/- button, and move the indicator to SOUND,and press VOL+/- button to select the proper sound.If the sound is abnormalCOLOR AUTOSOUND BGSELECT ADJUST