Haier 32D3005 Service Manual

Also see for 39D3005: Specifications Service manual

Haier 32D3005 Service Manual Manual pdf 20 page image

Service ManualModel No.: 32D30055-2. External Equipment ConnectionsAntenna ConnectionConnect your aerial to the back of the TV into theANTENNA IN socket.Improve Your SignalTo improve picture quality in a poor signal area, use asignal amplifier (not supplied).Connect Your PC to the TVConnect a DVD Player or VCR toYour TVThere are two ways in which you can connect a DVDplayer or VCR to your TV. Make sure that both the TVand DVD player or VCR are switched off before youconnect them.HDMI InputYou can use your TV as a monitor for your personalcomputer by connecting it with a VGA cable (notsupplied).A Connect the cable from the HDMI device to the TVHDMI socket.ABRead your computer user guide and check it has aVGA connector.Turn off your TV and PC.BCPress the SOURCE button to select HDMI mode.Refer to the HDMI device user guide for how tooperate.C Connect a D type 15-pin VGA interface cable to theVGA video interface connector on the PC. Connectthe other end of the cable to the PC interfaceconnector on the TV. Tighten the screws on theDEVGA connectors and connect the audio cable (notsupplied) to the audio input socket on the back of theTV.Turn on the TV firstly and then the PC.Press the Source button on the TV or TV remotecontrol to set the video input mode to PC.F Once the image shows, if there is noise present,change the PC mode to other resolutions, change therefresh rate to other rate or adjust the brightness andcontrast on the menu until the picture is clear.Connect a DVD Player to Your TVConnect the DVD video outputs (Y, P b , Pr ) to theCOMPONENT (Y, Pb , Pr ) IN socket on your TV.ABCTurn on the DVD player and insert a DVD disk.Press the SOURCE button to select COMPONENTmode.Refer to the DVD player user guide for operatinginstructions.19