Haier 3HUM20H03 Operation Manual

Contents

16Set clock correctly before starting TIMER operation.1. After unit starts, select your desired operation mode.Operation mode will be displayed on LCD2. Timer mode selectionPress TMIER button to change TIMER mode. Every time'the button pressed, display changes as follows:OperationTimer On/Off OperationRemote controllerRemote controller:BLANKTIMER ON TIMER OFF TIMER ON-OFFThen select your desired TIMER mode (TIMER ON orTIMER OFF). " "or " "will flash.3.Time settingPress HOUR button.Every time the button is pressed, time settingincreases 1 min, if kept depressed, it will increaserapidly.Every time the button is pressed, time settingdecreases 1 min, if kept depressed, it will decreaserapidly.It can be adjusted within 24 hours.4.Confirming your settingAfter setting correct time, press SET button to confirm" "or" "on the remote controller stops flashing.Time displayed: Unit starts or stops at x hour x min.(TIMER ON or TIMER OFF).5.Cancel TIMER modeJust press TIMER button several times until TIMERmode disappears.Hints:After replacing batteries or a power failure happens, time setting should be reset.Remote controller possesses memory function, when use TIMER mode next time,justpress SET button after mode selecting if time setting is the same as previous one.