6Parts and FunctionsNOTE:(1) The following functions and related displays are not available:(2) Cooling only unit do not have functions and displays related with heating..Operation mode AUTO FANCOOL DRYRemote controllerDisplay boardHEAT1516Singal receiver holeWhen the remote controller appears abnormal,use a sharp pointed article to press this buttonto reset the remote controller normal.1.RESETUsed to select TIMER ON, TIMER OFF,TIMER ON-OFF.3. TIMER buttonUsed to set correct time.4. CLOCK buttonUsed to select sleep mode.5. SLEEP button6. MODE buttonAUTO COOL DRY FAN HEATUsed to set clock and timer setting.7. HOUR buttonUsed to set healthy operation.8. HEALTH buttonUsed for unit start and stop.9. ON/OFF button10. TIMER ON display11. FAN SPEED displayLOW HIMED AUTO12. LOCK display13. SWING UP/DOWN display14. SLEEP display15. HEALTH displayUsed to select your desired temperature.16. Operation mode display18. POWER/SOFT display19. Left/right air flow displayRemote controller: to display the TEMP. setting.20. TEMP display21. TIMER OFF display22. TIMER display23. TEMP buttonUsed to select fan speed: LOW,MED, HI, AUTO.24. FAN buttonUsed to set the health airflow mode.25. HEALTH AIRFLOW button26. SWING UP/DOWN buttonUsed to select up or down air sending direction.27. SWING LEFT/RIGHT buttonUsed to select left/right air flow.Used to confirm timer and clock settings.28. SET button29. POWER/SOFT buttonUsed to lock buttons and LCD display. If pressed, theother buttons will be disabled and the lock conditiondisplay appears. Press it once again, lock will becanceled and lock condition display disappears.30. LOCKEvery time the button is pressed,display changesas follows:32. Ambient temp.display31 21302819POWER SOFTBLANK17.Singal sending display2.LIGHT buttonControl the lightening and extinguishing ofthe indoor LED display board.When receiving the remote control signal, display the settemperature and in the rest time the room temperature isdisplayed and this room temperature is only for reference.16 1631