Haier 42EP25SAT Owner's Manual

Also see for 42EP25BAT - ANNEXE 685: Owner's manual Service

Setting Up Your Remote ControlSELECTCH.LIST FAV.LIST AUDIO LISTPIP SWAP AUDIO SWAP POSITIONCCP.MODE S.MODEFREEZEENUUIDENPUTINFOEXITRA CSAPSLEEPVOL + CH+Q.VIEWOKVO L - CH-Code Display Mode1 Press and release SELECT button to desired device.2 Press and hold OK button, then press SELECT button about 3 seconds tillLED is on. Release 2 keys. LED flashes with the speed of twice per second.3 Enter [9][8][0] in turn to enter Code Display Mode . LED is off.4 Press and release [1] once, LED will flash. The times LED flashes is the first digitof code number.(no flash = 0)5 Press and release [2] once, LED will flash. The times LED flashes is the seconddigit of code number. (no flash = 0)6 Press and release [3] once, LED will flash. The times LED flashes is the third digitof code number. (no flash = 0)7 Code Display process is end and exit the mode automatically.8 Under Code Display Mode, the remote controller will be no reaction to other buttonspressed, and will automatically exit the mode if no any key is pressed within 10 seconds.Operation42 PLASMA TV