Haier AD18LS1ERA Service Manual

Also see for 3U19FS1ERA: Service manual Installation manual

Haier AD18LS1ERA Service Manual Manual pdf 59 page image

Select whether the drain hose will be connected tothe left or right side.(Fig.3)Insert the drain hose into the drain pan, then securethe drain hose with a nylon fastener.(Fig.6)Wrap the insulation (drain hose)around the drainhose connection.(Fig.7)Be sure to arrange the drain hose correctly so thatit is leveled lower than the drain hose connectingport of the indoor unit.(Fig.18)5. INSTALL THE DRAIN HOSEFig. 18Pass the drain hose through hereCONNECTING THE PIPINGOUTDOOR UNIT INSTALLATION1. FLARE PROCESSING(1) Cut the connection pipe with pipe cutters sothat the pipe is not deformed.(2) Holding the pipe downward so that cuttingscannot enter the pipe, remove the burrs.(3) Remove the flare nut from the indoor unit pipeand outdoor unit and insert the flare nut onto thepipe, and flare with a flaring tool.2. BENDING PIPESThe pipes are shaped by your hands. Be carefulnot to collapse them.NORemove the hole cover.OKArrange the drain hoselower than this portionDrain hoseVT wireDrain hoseFig. 19 Piping holeBase (Bottom)Intake grillVT wire holeCut the grillFig. 21OK NOExtend the pipe by unwinding it -58-