Operating Instructions1 2*AUTOMODE FANHEALTHTEMPCLOCK SETTIMER SLEEPRESETFILTER RESETON/OFF1SETSWINGFRESHSETLOCKRESETHEALTHFANT E M PMODE SLEEPCLOCKTIMERONOFF5LOW MID HIGHAUTOAUTOLOW MID HIGHAUTOAUTOAUTO RUN, COOL,HEAT and DRY operationUse COOL in summer.Use HEAT in winter.Use DRY in spring,autumn and in damp climate.(1) Unit start(2) Select operation mode(3) Select temp. settingPress ON/OFF button, unit starts.Previous operation status appears on display(Not Timer setting). Power indicator lights up.Press MODE button. For each press, operation modechanges as follows:Unit will run in operation mode displayed on LCD.Stop display at your desired mode.Every time the button is pressed, temp. settingincreases 1 C.If button is kept depressed, temp.setting willincrease quickly.Every time the button is pressed, temp. settingdecreases 1 C.If button is kept depressed, temp. setting willdecrease quickly.RecommendationsHintsWire controller can memorize each operation status.When starting it next time, just press ON/OFF buttonand unit will run in previous status.Press FAN button. For each press,fan speed changes as follows:(4) Fan speed selectionUnit runs at the speed displayed on LCD.In HEATmode, warm air will blow out after a short periodof time due to cold-draft prevention function.In DRY mode, when room temp. becomes 2 C higherthan temp. setting, unit will run intermittently atLOW speed regardless of FAN setting.Unit will start running to reach the temp. settingon LCD.Press ON/OFF button.Only time and room temp remains on LCD.All indicators go out.Vertical flap closes automatically.(5) Unit stopPress TEMP buttonAUTO COOL DRY FANHEATAMWire controllerRemote controllerAuto running: During the Auto running mode, air conditioning running and can auto-select the cooling, heating, fanmode according to the room temperature.Fan running: The AC only have air supply running no cooling and heating running at the condition, AC can't have autoair supply running, and can't display the setting temperature value on the LCD.During the heating running, after start the AC, in order to prevent cooled air, AC can stop for a while before send heatair.During the dehumification running, when the room temp. setting temp. , not setting condition according to the air speed.SWINGLIGHT2345