Haier AP182AKAAA Operation Manual

Haier AP182AKAAA Operation Manual Manual pdf 26 page image

Installation proceduresDisplay of whole unitInstallation of outdoor unitInstallation dimension of outdoor unit (mm)Try to bring the packed unit to the installation place.When it is inevitable to unpack the unit, be careful not to damage the unit. Wrap it withnylon etc.After unpacking, be sure to put it with the front side of the unit facing up.Note: When delivering, don't hold plasticparts like inlet and outlet grill etc.Selection of installation placePlace strong enough to support the unit and will not cause vibration and noise.Place where discharged wind and noise doesn't cause a nuisance to the neighbors.Place where is less affected by rain or direct sunlight and is sufficiently ventilated, orto install a shield.Place with enough space for smooth air flow.Fixing of the unitFix outdoor unit using M10 bolt to concrete floor horizontally.If installed on the wall or on top of a roof, bracket should be fixed securely to resistearthquake or storms.Use rubber pad during installation against unit vibration.Delivery Facing upDo not install the air conditioner on the non-special metal bracket (e.g. theftguarding net).If outdoor unit is street installed, it cannot be lower than 2.5mUse expansion bolt (M10) to fix the outdoor unit installation bracket on the wall.Use bolt (M10) and nut to fix the outdoor unit on the installation bracket and keephorizontal.The air outlet of outdoor unit shall be no less than 3m away from the neighbors. Ifnecessary, it shall get the neighbor's agreement.24550310