Haier AP242ACBEA Operation And Installation Manual

Also see for AP242ACBEA: Service manual Service manual

Parts42526212336FRESHHIGH/SOTIMERSETFILTERB AM DHEALTHRESET LOCKSLEEPFANTEMPONOFFSWINGMODECLOCKCODE LIGHTOFFAUTO12346791013171558181922343324272832313035201416Remote controller1.TEMP Setting Button(Used to set temperature. Setting ranges:16 C to 30 C)In Up/Down function, for controlling up anddown filter.2.SWING ButtonIf you press this button once, auto swing willbe activated.If you press this button again, the louver willfix in the present position.3.Power ON/OFF ButtonUsed for unit start and stopAfter power on, the LCD of remote controllerwill display the previous operation state (exceptfor TIMER,SLEEP and SWING state).4.Operation MODEUsed to select operation mode.Every time you press MODE button, operation modechanges according to following sequence:6.CLOCK ButtonUsed to set correct time.AUTO FANHEATCOOL DRY7.TIMER ButtonUsed to select TIMER mode:TIMER ON,TIMEROFF, TIMER ON/OFF.(Note: if time of TIMER ON is the same as TIMEROFF,TIMER ON/OFF cannot be set)10.RESET ButtonPress this button by using a sharp article to resumethe correct operation of the remote controller in caseof need, i.e. for example in case of malfunctions dueto electromagnetic disturbance.5.HEALTH Button13.HOUR AdjustmentUsed to set clock and timer setting15.SET ButtonUsed to confirm TIMER and CLOCK settings when heatingor cooling.8. FILTER ButtonUsed to set up/down function of filter.NOTE: 1.Single cooling air conditioner does not have the functions related to heating.2.This kind of unit does not have the following related functions :9.CODE ButtonUsed to select Code A or B, this manual is for CodeA.12112914.HIGH/SO ButtonUsed to select HIGH or SOFT operation.11.LIGHT ButtonUsed to light the control panel (only for cabinet unit)12.LOCK ButtonUsed to lock operation button and LCD display contents:by pressing this button, other buttons comes out offunction and lock state display appears; if you press itagain, lock state will be no more active and lock statedisplay will disappear.16.FRESH ButtonUsed to set fresh mode, the unit will draw in fresh air.5 11 14 16 21 24 28 29 30HEAT3737