Haier AU182XFERA Installation Manual

Also see for AU182XFERA: Service manual Service manual Installation manual

Contents

Haier AU182XFERA Installation Manual Manual pdf 7 page image

51. Do not connected the embedded branch piping and the outdoor unit when only carrying out piping workwithout connecting the indoor unit in ordor to add another indoor unit later. Make sure no dirt or mosituregets into eigher side of the embedded branch piping.2.It is impossible to connect the indoor unit for one room only. Be sure to connect at least 2 rooms.Installation drawings of indoor and outdoor unitsWrap the insulation pipe with the finishingtape from bottom to top.Cut thermal insulation pipe to anappropriate length and wrap it with tape,making sure that no gap is left in theinsulation pipe's cut line.more than 10cmmore than 10cmmore than 60cmmore than 25cmArrangement of piping directionsIf there is the danger of the unit falling or overturning, fix the unit with foundation bolts, or with wire orother means.If the location does not have good drainage, place the unit on a level mounting base(or a plastic pedestal).Install the outdoor unit in a level position. Failure to do so may result in water leakage or accumulation.Rear leftRear rightRightBelowLeftAttention must bepaid to the rising upof drain hoseMore than 5cmMore than 10cm