CH+CH-VOL- VOL+MENUCH+CH-VOL- VOL+MENUCH+CH-VOL- VOL+MENUFine TuneProgram Lock buttonsTune (Continued)Fine Tune and Program Lock functionsIf the picture and/or sound are poor, try using the FINETUNE feature. Do not use this feature unless receptionis poor.1. Press the CH+/- buttons or Directselect button to select the desiredchannel number. ( For example, thechannel 1.)2. Press the MENU button to displaythe menu, then press CH+/-buttonsto select TUNE menu, press VOL+button to enter.3. Press the CH+/- buttons tomove the indicator to " Programedit ", then press the VOL+ buttonto sub-menu.4. Press the CH+/- buttons tomove the indicator to " Fine Tune ".5. Press the VOL+ button to enterthe Fine Tune Menu, and thenuntil it has searched theTV signal you need.theVOL- button to search downwardsor the VOL+ button to searchupwardsIf the program Lock and the program Lock of the LockSet are ON, the screen is black and LOCK will shown.The program is locked.1.Repeat the steps 1-4 of FineTune to select the Lock item.. Press the VOL+ button to turnthe Lock function to "On ".. Press the H.Lock button to turnthe Channel Lock function to "On "(Refer to page 27),then the screenis black. After setting the Channel Lock to On, the Lock of theProgram Edit menu will fail.ExchangeProgram editSearchAuto SearchQuick SearchMENUPictureSoundTuneSetupTimerProgram NO. 2Skip OffLock OffSound Sys. DKFine tune <144.20MHz>Program editProgram NO. 2Skip OffLock OffSound Sys. DKFine tune <144.20MHz>Program edit