Haier DTA-1486 Owner's Manual

Also see for DTA-1486: Service manual Service manual

Watching TVWatching TV programYou can watch TV program in a preset channel.How to select TV programSelect the desired programSelect the desired sound1 Using "Program number" buttons2 Using the P+/- buttonsPress the P+ button to select a channel number in numberdirection.Press the P- button to select a channel number in numberdirection.increasingdecreasingPress the V-/+ buttons on the remote or the front of theTV set to adjust the volume level. The range is 0~99. Whenthe volume buttons are pressed the volume level isdisplayed automatically on the TV screen.If picture colo r is abnormaluUse the P+/- buttons to select Colour then theV-/+ buttons to change between Auto, PAL, NTSC,SECAM and Press the EXIT button to savethe setting.NTSC443.If the colour or sound of a channel is abnormalUsually this should be set in theAuto position. However if thecolours displayed on the screenare incorrect you can manuallyselect the correct colour system.When finish remember to turn itback to auto again so that otherprograms will still work correctly.To select the colour changeoption press the MENU buttonon the remote control.Directly enter the channel number with the numeric keypadon the remote control.To select channel numbers from 10 ~ 99 press [-/--] buttonand enter the two digit channel numberTo select channel numbers from 100 ~ 218 press [-/--] buttontwice and enter the 3 digit channel numberIf the picture sound is abnormalUse the P+/- buttons to select Sound then press theV-/+ buttons to select the sound system.TUNESOUND BGBAND VHFLSKIP OFFPROGRAM 0SEARCHFINE TUNEAUTO SEARCHCOLOUR AUTOP+P-V- V+MENUP+P-V- V+MENU1 2 3 45 6 7 899 00