Haier FCD-6.6 Instruction Manual
FCD-6.6FCD-8.80040502137A2010/06/21SpecificationsIntroduction of exterior and accessoriesTroubleshootingSide view Cross-section viewb1a1Rear viewModel No.Netweight(kg)Volume(L) a1 b1 c1 d1 e1FCD-6.6 5 6.6 100mm 348mm 246mm 120mm 273mm5.5 8.8 100mm 387mm 255mm 120mm 283mmA Hot water outlet B Cold water intake C Heating pipeD Temperature measurement pipe E Inner chamber F Anode rodNote: The margin of error for the above parameters is ±10%.Product Model No.Electric WaterHeater (unit)Safety Valve/WaterDrainage Pipe (set)InstructionManual (copy)ExpandableHook (pcs)FCD-6.6 1 1 1 2Technical dataPacking listElectrical DiagramL: Brown wireN: Blue line (blue)MT: High temperature limiterBT: ThermostatEH: HeatingE: Yellow/green wireHL: Heating indicatorSymptom Things to Check SolutionsNo water1 Whether the water supplyhas stopped or whether thewater pressure is too lowCheck2 Whether the water-usagepoint is blocked or whetherthe hot water valve isopenedCheck and clearOnly coldwater butthe heatingindicator lampis lit1 Whether hot water outlet isopened Check and open2 Whether the watertemperature is adjusted Adjust water temperature3 Heating time is too shortand set temperature is notachievedContinue heating4 Whetehr heating pipe isdamagedConfirm it is not due to the reasons under①② ③, then contact Maintenance DepartmentOnly coldwater andthe heatingindicator lampis not lit1 Whether power is properlyconnected Check power socket2 Check whether there ispower supply Connect power switch3 Whether thermostat is outof controlConfirm it is not due to the reasons under① ②,then contact Maintenance DepartmentHeatingindicator lightIs on all thetime1 Water has not reached theset temperature Continue heating2 Whether thermostat is outof controlConfirm it is not due to the reason under①,then contact Maintenance DepartmentWater volumeis sometimeslarge or small,or water issometimeshot or coldWhether water pressure isstableAdjust water outflowing volume or make surewater pressure is stable before usingSamll hotwater outflowvolume1 Whether the presenttemperature setting is toolowRe-adjust the temperature setting2 Whether water pressure istoo muchAs far as possible reduce the water valve'soutflow volume during use; for details pleaserefer to the tips in Important NoticesHaier Home Water HeaterInstruction manualSafety Notices (Please read before use)Prohibited Compulsory Matters Essential MattersImmediately cut off power supply andcontact our Service Center once thewater heater does not work properly oremits burnt smell.230V/50Hz independent power sourcemust be used at all times.To ensure safety, the water heatershould be connected to independentsockets (do not use adapters), withreliable earthing. In addition the powersocket must conform to nationalstandards. Use of water heater withoutreliable earthing is strictly prohibited.Use pen multimeter to check whetherthe live line and zero line are reverse.Do not use damaged wire and powersocket. Promptly clean the dust on thepower plug and socket.Check the power meter and the electricwire's diameter to ensure that theycomply with the rated current for thewater heater. Where necessary engagequalified electrician to check theelectric circuit.Do not touch the plug with wet hands,and make sure that the water heater,plug socket do not come into contactwith water. If they are accidentally wet,they must be checked by professionsappointed by our company beforeusing, in order to prevent electrocution.Sotring of inflammable and explosiveitems near the water heater is strictlyprohibited.D o n o t co n n e c t to p owe r w h e ninstalling or repairing the water heater.Non-professionals are strictly prohibitedfrom carrying out repairs, maintenance,dismantling or revamping of the waterheater.Installation of water heater outdoors isstrictly prohibited.Do not install the water heater in anenvironment which is susceptible to ice-formation. Ice will cause the containerand water pipe to break, leading toscalding and water leakage.Please take precautionary measuresduring cold weather, in order to preventdamage to water heater from freezing.If the soft power cable is damaged, itmust be replaced by professional stafffrom the manufacturers or MaintenanceDepartment in order to avoid danger.Take care not to be scalded by heatedwater.• Touching of hot water valve andpipes is strictly prohibited.• Make sure to check the watertemperature before use; use onlywhen it feels suitable.Do not use water from the water heaterfor drinking or similar purposes.Please cut off the power supply ifthe water heater was not used for anextended period of time. Drain thewater heater of all water accordingto the instructions in the chapter onCleaning and Maintenance.Please read this Instruction Manual carefully before use.Please retain this manual for future reference.Quantity Name of partsEarthingForbiddenForbiddenForbiddenForbiddenForbiddenForbiddenForbiddenForbiddenWarningWarningWarningWarningWarningWarningCautionCautionCautionThis appliance is not intended for useby persons (including children) withreduced physical, sensory or mentalcapabilities, or lack of experience andknowledge, unless they have beengiven supervision or instructionconcerning use of the appliance bya person responsible for their safety.Children should be supervised toensure that they do not play with theappliance.CautionMeanings of Icons1 2Rated voltage/powerRatedfrequencyRatedtemperatureWaterproofratingRatedpressure Water pressure230V~/2000W 50Hz 75°C IPX4 0.75MPa Not less than 0.05MPaFCD-8.8Not more than 0.7MPaFCD-8.8 1 1 1 2 |
Related manuals for Haier FCD-6.6
Haier FCD-HM50 Operation Instruction Manual
Haier ES6V-Q2 Instruction Manual
Haier ES6V-Q1 Instruction Manual
Haier ES50V-F1(EU) Instruction Manual
Haier ES50V-F1(EU) Instruction Manual
Haier ES50V-F1(EU) Instruction Manual
Haier ES10V-E1(H) Instruction Manual
Haier ES15V-SD Instruction Manual
Haier ES30V-A3 Instruction Manual
Haier ES8V-Q1(EU) Instruction Manual
manualsdatabase
Your AI-powered manual search engine