Haier H2SM- - annexe 1 Operation Manual

Also see for H2SM-: Operating manual Operation manual Operating manual Operation manual Operation manual

Contents

Haier H2SM- - annexe 1 Operation Manual Manual pdf 4 page image

4OperationSleep OperationIf the wind speed is high or middle beforesetting for the sleep, set for lowing the windspeed after sleeping.If it is low wind, no change.5.Set the wind speed change when sleepingUse of SLEEP functionOperation Mode1. In COOL,DRY modeSLEEP operation starts SLEEP operation stopsSLEEPoperation startsSLEEPoperation stopsApprox.6hrs1 hr1 hr1 hr3 hrs3 hrsRises 1O CRises 1O CRises 1O CTemp.settingTemp.settingUnit stopUnit stopIn COOL, DRY modeIn HEAT modeDecreases 2 OCDecreases 2OC1 hr2.3.In HEAT modeIn AUTO mode4. In FAN modeIt has no SLEEP function.NoteWhen TIMER function is set, the sleeping functioncan't be set up .After the sleeping function is set up ,if user resets TIMER function, the sleeping functionwill be cancelled;the machine will be in the state oftiming-on.Before going to bed,you can simply press the SLEEPbutton and unit will operate in SLEEP mode and bringyou a sound sleep.After the unit starts,set the operation status,then press SLEEP button before which theclock must be adjusted and time being set.1 hours after SLEEP mode starts,temp.will become1 higher than temp.setting.After another 1 hours,temp.rises by 1 futher.The unit will run for further6 hours then stops Temp. is higher than temp.setting so that room temperature won’t be too lowfor your sleep.1 hours after SLEEP mode starts,temp willbecome 2 lower than temp.setting.Afteranother 1 hours,temp decrease by 2futher.After more another 3 hours,temp.risesby 1 futher.The unit will run for further 3hours then stops.Temp.is lower than temp.setting so that room temperature won’t betoo high for your sleep.The unit operaters in corresponding sleep modeadapted to the automatically selected operationmode.O CO CO COCO C