Haier H2SM- - annexe 18 Operation Manual

Also see for 2HUM18R03/R2(DB): Operating manual Operation manual

Haier H2SM- - annexe 18 Operation Manual Manual pdf 18 page image

OperationHeat OperationRemote controller 1. Unit startLink with electronic power.Press ON/OFF on the remote controller, unit starts.The liquid crystal will display the working state of lasttime (Except Timer, Sleep, Power/Soft and Healthairflow).2.Select operation modePress FAN button. For each press, fan speed changes asfollows:Press MODE button. For each press, operation modechanges as follows:Remote controller:Remote controller:Then Select HEAT operationPress TEMP. buttonEvery time the button is pressed, temp.settingincrease 1oC,if kept depressed, it will increaserapidly.Every time the button is pressed, temp.settingdecrease 1oC,if kept depressed, it will decreaserapidly.Select a desired temperature.4.Fan speed selection3.Select temp.settingAir conditioner is running under displayed wind speedIN HEAT mode, warm air will blow out after a short periodof the time due to cold-draft prevention function.AUTOLOW MED HI AUTOCOOL DRY FAN HEATWhen FAN is set to AUTO, the air conditionerautomatically adjusts the fan speed according to roomtemperature.136