Haier H2SM- - annexe 24 Operation Manual

Also see for H2SM-: Operating manual Operation manual Operating manual Operation manual Operation manual

Contents

Auto OperationOperationRemote controller9POWER/SOFTAbout Auto OperationUnder the mode of auto operation, air conditioner willautomatically select Cool or Heat operation accordingto room temperature.5.Unit stopPress ON/OFF button, the unit stops.1. Unit startPress ON/OFF on the remote controller, unit starts.2.Select operation modePress MODE button. For each press, operation modechanges as follows:Remote controller:Then Select Auto operationAUTO COOL DRY FAN HEATPress FAN button. For each press, fan speed changes asfollows:Remote controller:Press TEMP. buttonEvery time the button is pressed, temp.settingincrease 1oC,if kept depressed, it will increaserapidlyEvery time the button is pressed, temp.settingdecrease 1oC,if kept depressed, it will decreaserapidlySelect a desired temperature.4.Fan speed selection3.Select temp.settingAir conditioner is running under displayed fan speed.When FAN is set to AUTO, the air conditionerautomatically adjusts the fan speed according to roomtemperature.LOW MED HI AUTOFRESH