6HintsAfter replacing with new batteries, remote controller will conduct self-check, displayingall information on LCD. Then, it will become normal.Buttons and display of the remote controller.Parts and Functions1.Mode displayAUTOCOOLDRYHEATFAN2. SWING display3. FAN SPEED display4. HEALTH display5. SLEEP display6. LOCK display7. TIMER ON display8. AUXILIARY HEAT display9. HEALTH10. MODEUsed to select AUTO,COOL,DRY,HEATand FAN11. CLOCKUsed to set correct time12. TIMERUsed to select TIMER ON,TIMER OFF13. RESETUsed to reset the controller back tonormal condition.14. CODEUsed to select code A or B with a press,Aor B will be displayed on LCD.pleaseselect A without special explanation15. CODE display16. SIGNAL SENDING display17. POWER/SOFT display18. TEMP. display19. CLOCK display20. TIMER OFF display21. TEMPUsed to select your desired temperature22. FANUsed to select fan speed23. POWER ON/OFFUsed for unit start or stop24. SLEEPUsed to select sleep modeLOW MED HI AUTO25. SWING26. SETUsed to confirm timer and clock settings27. HOURUsed to set clock and timer settingsNOTE:(1)The following functions and related displays are not available: AUXILIARY HEAT display, POWER/SOFT display, LOCK display.(2)If the Air conditioner don't have the function of the code ,press code B can cause it not available.(3)Cooling only unit do not have functions and displays related with heating.Clock setWhen unit is started for the first time and after replacing batteries in remote controller, clock shouldbe adjusted as follows:Press CLOCK button, "AM" or "PM" flashes.Press or to set correct time. Each press will increase or decrease 1min. If the button is keptdepressed, time will change quickly.After time setting is confirmed, press SET, "AM "and "PM" stop flashing, while clock starts working.