Haier HE32A4VHA Owner's Manual

Also see for HL32LE2: Service manual Owner's manual

Haier HE32A4VHA Owner's Manual Manual pdf 9 page image

InstallationHaier LED HDTV EN-8Choose Your ConnectionThere are several ways to connect your television,depending on the components you want to connectand the quality of the signal you want to achieve bedisplayed. The following are examples of some differentways to connect your TV with different input sources.Connecting a VCRTo avoid picture noise (interference), leave an adequatedistance between the VCR and TV.Back of VCRBack of TVVideo= yellowAudio left= whiteAudio right= redAV INConnection Option 1Set VCR output switch to channel 3 or 4 and then tunethe TV to the same channel number.Connection Option 2Connect the audio and video cables from the VCR’sA output jacks to the TV input jacks, as shown in thefigure. When connecting the TV to VCR, match thejack colors (Video = yellow, Audio Left = white, andAudio Right = red).Insert a video tape into the VCR and pressB PLAY onthe VCR. (Refer to the VCR owner’s manual.)Select the input source with using theC INPUT buttonon the remote control, and then press /buttonto select the source, press ENTER button to confirm.External A/V Source SetupHow to connectConnect the audio and video cables from theqexternal equipment’s output jacks to the TV inputjacks, as shown in the figure.When connecting the TV to external equipment,qmatch the jack colors (Video = yellow, Audio Left =white, and Audio Right = red).Camcorder or videogame setVideo= yellowAudio left= whiteAudio right= redBack of TVAV INHow to useSelect the input source using theA INPUT button onthe remote control.Press theB / button to select the desired source.Press theC ENTER button to confirm.Operate the corresponding external equipment.DConnecting a DVD playerHow to connectConnect the DVD video outputs (COMPONENT) toA the Y Pb Pr jacks on the TV and connect the DVDaudio outputs to the Y Pb Pr Audio IN jacks on theTV, as shown in the figure.If your DVD only has an S-VIDEO output jack, connectB this to the S-VIDEO input on the TV, as shown in thefigure.Alternatively, you can connect the DVD playerto your TV using the audio and video jacks, similarto connecting a VCR (refer to the VCR figure on theprevious page).