Haier HFM12HC03 Operation Manual

Also see for AF18AS1ERA: Operation manual

OperationSleep OperationIf the wind speed is high or middle before setting for thesleep, set for lowing the wind speed after sleeping.If it is low wind, no change.5.Set the wind speed change when sleepingOperation Mode1. In COOL,DRY modeSLEEP operation starts SLEEP operation stopsSLEEPoperation startsSLEEPoperation stopsApprox.6hrs1 hr1 hr1 hr3 hrs3 hrsRises 1O CRises 1O CRises 1 OCTemp.settingTemp.settingUnit stopUnit stopIn COOL, DRY modeIn HEAT modeDecreases 2O CDecreases 2O C1 hr2.3.In HEAT modeIn AUTO mode4. In FAN modeIt has no SLEEP function.NoteWhen TIMER function is set, the sleeping function can’t beset up .After the sleeping function is set up ,TIMER function, the sleeping function will be cancelled; themachine will be in the state of timing-on.POWER/QUIET Operation1 hours after SLEEP mode starts,temp.will becomehigher than temp.setting.After another 1 hours,temp.risesby 1 futher.The unit will run for further 6 hours then stopsTemp. is higher than temp.setting so that room temperaturewon’t be too low for your sleep.1 hours after SLEEP mode starts,temp will become 2lower than temp.setting.After another 1 hours,tempdecrease by 2rises by 1 futher.The unit will run for further 3 hours thenstops.Temp.is lower than temp. setting so that roomtemperature won’t be too high for your sleep.The unit operaters in corresponding sleep modeadapted to the automatically selected operation mode.O COC futher.After more another 3 hours,temp.O C1 OCO Cif user resetsPress button to enter additional options, whencycle display to , will flash. And then pressenter to sleep function.(1) POWER Operation(2) QUIET OperationNote ˖When you need rapid heating or cooling, you can use this function.You can use this function when silence is needed for rest or reading.During POWER operation, in rapid HEAT or COOL mode ,the room will show inhomogeneous temperature distribution.Long period QUIET operation will cause effect of not toocool or not too warm.Press QUIET button, the remote controller will show ,and then achieve to the quiet function. Press again thisQUIET button , the quiet function will be cancelled.Press button to enter additional options, when cycledisplay to , will flash and then press ,enter topower function. When cancel the function, please enteradditional options again and to cancel power function.CEAll the products are in conformity with the followingEuropean provision:- Low Voltage Directive 73/23/EEC- Low Voltage Directive 2006/95/EC-Electomagnetic CompatibilitY 89/336/EEC-Electomagnetic CompatibilitY 2004/108/ECROHSThe products are fulfilled with the requirements in thedirective 2002/95/EEC of the European parliament and ofcouncil on the Restriction of the use of Certain HazardousSubstances in Electrical and Electronic Equipment (EURoHS Directive)WEEEDISPOSAL REQUIREMENTS:Your air conditioning product is marked with thissymbol.This means that electrical and electronicproducts shall not be mixed with unsortedhousehold waste. Do not try to dismantle thesystem yourself : the dismantling of the airEUROPEAN REGULATIONSCONFORMITY FOR THE MODELSIn accordance with the directive 2002/96/CE of the Europeanparliament, herewith we inform the consumer about the dis-posal requirements of the electrical and electronic products.conditioning system,treatment of the refrigerant, of oil and ofother part must be done by a qualified installer in accordancewith relevant local and national legislation. Air conditionersmust be treated at a specialized treatment facility for reuse,recycling and recovery. By ensuring this product is disposedof correctly, you will help to prevent potential negative cons-equences for the environment and humen health. Pleasecontact the installer or local authority for more information.Battery must be removed from the remote controller and dis-posed of separately in accordance with relevant local andnationl legislation.4