Haier HFU-09H03/R1 Operating Manual

Also see for HFU-09H03: Operation manual

Haier HFU-09H03/R1 Operating Manual Manual pdf 18 page image

15Before going to bed , you can simply press theSLEEP button and unit will operation in SLEEPmode and bring you a sound sleep.Use of SLEEP functionAfter the unit starts, set the operation status,then press SLEEP button before which theclock must be adjusted and time being set.Operation Mode1. In COOL,DRY mode3 hours after SLEEP mode starts, temperaturewill become 1oC higher than temperature setting.After another 3 hours temperature rises by 1oCfurther. The unit will run for further 2 hours thenstops. Temperature is higher than temperaturesetting so that room temperature won't be toolow for your sleep.2. In HEAT mode3 hours after SLEEP mode starts, temperaturewill become 1oC lower than temperature setting.After another 3 hours temperature decrease by1oC further. The unit will run for further 2 hoursthen stops. Temperature is lower thantemperature setting so that room temperaturewon't be too high for your sleep.3. In AUTO modeThe unit operates in corresponding sleepSLEEP mode adapted to the automaticallyselected operation mode.4. In FAN modeIt has timing off function.5. The sleep time can be adjusted withinthe range of 1-8 hours.Push the SLEEP button. The remotecontroller will display " ", and display thetiming off and detail off time in the timingoff setting area.Push the time adjusting button to adjust thedetail sleep time.6. If the sleep time in cooling, dehumidifyingand heating run is less than 8 hoursWithin the set sleep time, the conditioner willrun as per the procedure described in 1 and2. It will be switched off automatically whenthe sleep time is expired.In COOL,DRY modeUnit stopTemperature settingSLEEP operation starts SLEEP operation stopsApprox. 2 hrs3 hr3 hrRises 1oCRises 1 oCUnit stopTemperature settingSLEEPoperation starts SLEEPoperation stops3 hrDecreases 1oC3 hrDecreases 1oCIn HEAT modeApprox. 2 hrsRemote controllerOperationSLEEP Operation