1.Press to turn on and off the TV2.Press to switch input source to USB in3.Display the guide when you are watching analog ordigital channels4.Select a closed caption5.Press repeatedly to cycle through the available picturemodes6.Press to cycle through different sound settings7.Show the input source8.Switches the video sound on or off9.Press to adjust the volume10.Press to open the on-screen menu11.Thumbstick(Up/Down/Left/Right)Allows you to navigate the on-screen menusand adjust the system settings to your preference.12.Press to display the sleep timer option13.DVD PLAY/PAUSE14.DVD Open/close15.DVD FAST FORWARD16.DVD FAST REVERSE17.DVD CALL18.DVD MENU19.DVD SEARCH20.DVD ANGLE21.Press to switch input source to DVD in22.Open the channel list in TV23.Select MONO, STEREO, SAP in NTSC system24.Open the favourite channel list in TV25.Press to change the aspect ratio26.Press to change a channel27.Press to select digital channels. For example, to enter“54-3”, press “54”, “ ” and “3”28.Press to jump back and forth between two channels29.Press to scan through channels. To scan quicklybetween the last two channels, press and hold downeither +/- .30.Exit On Screen Display31.Accesses the highlighted item in the on-screen menu32.Press to display the TV status information on the topof the TV screen33.DVD STOP34.DVD REPEAT35.DVD Previous Chapter36.DVD Next Chapter37.DVD AUDIO Mode38.DVD SETUP39.DVD PROGRAM40.DVD SUBTITLERemote Control Key FunctionsWhen using the remote control, aim ittowards the remote sensor on the TVUPDOWNLEFT RIGHT(For TV with DVD)OPEN/CLOSE PLAY/PAUSEREVD.MENUSEARCHD.CALLANGLED.AUDIOSUBTITLEENTERSTOP REPEATPREV NEXTSETUPPROGRAMUSBGUIDEINPUTMUTEVOL CHMENUSLEEP DISPLAYEXITRECALLPICTURE AUDIO ARC FAVORITECCD MTS/SAP CH.LISTDVD18192021222324252627282930313233343536373839401234567891011121314151617Downloaded from www.Manualslib.com manuals search engine