Haier HL26S-A Owner's Manual

Also see for HL32S-A: Servise manual

Haier HL26S-A Owner's Manual Manual pdf 13 page image

HDMI/DVI IN 1 HDMI/DVI IN 2 PC INVIDEOPrPbYPrPbYPC/DVIAUDIO INHow to connect1. To get the best picture quality, adjust the PC graphics card to 10242. Use the TV`s PC or DVI (Digital Visual Interface)Audio IN port for video connections, depending on your PCconnector.If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of either PCr HDMI/DVI IN to display the PC on the TV.If the graphic card on the PC does output analog and digital RGB simultaneously, set the TV to eitheDVI; (the other mode is set to Plug and Play automatically by the TV.)3. Then, make the corresponding audio connection. If using a sound card, adjust the PC sound as required.How to use1. Turn on the PC and the TV.2. Turn on the display by pressing the POWER button on the TV's remote control.3. Use INPUT on the remote control to select PC or HDMI/DVI source.4. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast orbrightness in PC mode. If noise is present, change the PC mode to another resolution, change the refresh rate toanother rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PCgraphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.Note1.Use a DVI cable.2.Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may become permanentlyimprinted on the screen.3. The synchronization input form for Horizontal and Vertical frequencies is separate.x768 .IN or PC orHDMI/ResolutionFramefrequency(Hz)VGASVGAXGA640*480 60Hz800*600 60Hz/75Hz1024*768 60HzMode ResolutionExternal Equipment ConnectionsInstallation75HzPC connectionOwner s Manual 13