Haier HL32XSL2 Owner's Manual

Also see for HL32XSL2: Owner's manual Troubleshooting guide Service manual

Haier HL32XSL2 Owner's Manual Manual pdf 12 page image

InstallationEN-11 Haier LED HDTVoutput analog and digital RGB simultaneously,connect only one of either VGA IN or HDMI IN todisplay the VGA on the TV.If the graphic card on the computer does output•analog and digital RGB simultaneously, set the TVto either VGA or HDMI; (the other mode is set toPlug and Play automatically by the TV.)Then, make the corresponding audio connection.CIf using a sound card, adjust the VGA sound asrequired.PC PC/DVI AUDIOPC IN Back of TVHow to useTurn on the computer and the TV.AUse INPUT on the remote control to select VGA orB HDMI source.Check the image on your TV. There may be noiseCassociated with the resolution, vertical pattern,contrast or brightness in VGA mode. If noiseis present, change the VGA mode to anotherresolution, change the refresh rate to another rateor adjust the brightness and contrast on the menuuntil the picture is clear. If the refresh rate of the VGAgraphic card can not be changed, change the VGAgraphic card or consult the manufacturer of the VGAgraphic card.NoteUse a DVI cable.RAvoid keeping a fixed image on the TV’s screenRfor a long period of time. The fixed image maybecome permanently imprinted on the screen.The synchronization input form for Horizontal andRVertical frequencies is separate.ResolutionYMode ResolutionFramefrequency(Hz)VGA 640×480 60 HzSVGA 800×600 60 Hz75 HzXGA 1024×768 60 Hz75 HzHDMI and DVI inputWhen the source device (DVD player or Set Top Box)supports HDMIHow To ConnectConnect the source device to HDMI port of this TVAwith an HDMI cable (not supplied with this product).No separated audio connection is necessary.BHow To UseIf the source device supports Auto HDMI function,•the output resolution of the source device will beautomatically set to 1280×720 p.If the source device does not support Auto HDMI,•you need to set the output resolution appropriately.To get the best picture quality, adjust the outputresolution of the source device to 1280×720 p.Select HDMI input source in input source option of•Select Main source menu.When the source device (DVD player or Set Top Box)supports DVIHow To ConnectConnect the source device to HDMI port of this TVA with a HDMI-to-DVI cable (not supplied with thisproduct).A separated audio connection is necessary.BC If the source device has an analog audio outputconnector, connect the source device audio output toDVI Audio In port located on the left side of HDMI port.