Haier HL40XSL2b Owner's Manual

Also see for HL40XSL2: Owner's manual Owner's manual Troubleshooting guide Owner's manual Service manual

Haier HL40XSL2b Owner's Manual Manual pdf 28 page image

Universal Remote ControlEN-27 Haier LED HDTVVideo.PressC /// button to select desired videofolder, and then press ENTER button to enter theplay interface.1. Play Time 4. Shuffle On or Off2. File Name 5. Audio Only3. Repeat 6. InformationPressD MENU button to display the option list.1. Play/Pause 4. Picture Mode2. Repeat 5. Screen Mode3. Show InfoPress the button on the remote control to select theE adjusted item, press ENTER button to confirm.PLAY/PAUSEREVREPEATSTOPUSB RECPREV NEXT6 73 541 2 1. Play or pause2 Stop3. Fast reverse4. Repeat5. Fast forward6. Play previous music7. Play next musicPressF EXIT button to return to the previous menu.Press USB button to exit the USB mode.NoteDo not remove USB device from the TV untilRyou have exited the USB mode otherwise youmay damage the USB device.Universal Remote ControlSetting Up Your Remote ControlAfter it has been set up properly, your remote controlcan operate in six different modes: TV, DVD, VCR,SETBOX, CABLE or AUDIO.NoteThe remote control might not be compatibleRwith all DVD Players, VCRs and Cable boxes.Control OperationProgram the Controller to work with your device.AChanging device mode by pressing the TVB , DVD, STB,CABLE, VCR, AUD key. When device is set, relateddevice LED will be on for 1 second and then be off.Aim the remote at the device.CUse the other Controller buttons to operate theD device. Device LED will blink if user presses any key(if the key has data in current mode.). If the key hasno data, then LED will not blink.Default init status: TV/Haier codeset.EManually Programming the ControlYCheck the code no. from the code list.Choose the device you want to program.AWhile Press and holdingB ENTER key, press INPUTkey, and device LED will be ON. Keep the status forabout 3 seconds and the LED will blink, indicatingthat the Controller is ready for programming, thenrelease both keys.Led will blink once when you enter a digit key,C indicating the digit key is programmed. If 3 digits areprogrammed successfully, device LED will be ON forabout 3 seconds and then blink twice per second.Then User now can:Try to operate the device by using power key.A)If operation can be done, pressB) ENTER key tosave current 3-digits code brand to EEPROM andexiting manually programming mode.Return to beginning of step 3. Reprogram theC)control.